A case study of 3D printed gears | Dual motors | Trampa Holypro 17ply | Overion 6374-130Kv 3550W Sensored | 12S 12Ah (532Wh with 2 x 6s Graphene) by der6fingerjo
Build by der6fingerjo at 05/05/2018 - 915 views
| Category | Part |
|---|---|
| Wheel Pulley | custom 3D printed inner gear |
| Enclosure | custom 3D printed |
| Motor mount | custom 3D printed gear drive |
| Wheels | Trampa Superstar 8 inch |
| Deck | Trampa Holypro 17ply |
| Controller | modified Sparkle remote (telemetry + display) |
| ESC | Dual VESC 6 |
| Motor (Satellite) | Overion 6374-130Kv 3550W Sensored |
| Balance charger | iSDT SC-620 |
| Batteries | 12S 12Ah (532Wh with 2 x 6s Graphene) |
| Performance stats | ||
|---|---|---|
| Wheels type | All Terrain | |
| Top speed | 31 kmh | 19 mph |
| Range | 30 km | 19 mi |
| Board weight | 15 kg | 33 lbs |
| Rider weight | 100 kg | 220 lbs |